Feuling HP+ Oil System Pack for M8

$994.95$1,027.95

Description

Feuling HP+ Oil System Pack for M8

 

  • Includes Fueling’s®​ High Flow billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory or Feuling OE+ camplates
  • Increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil port holes throughout the camplate to the port holes in the engine case which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings
  • Feuling oil pumps are bench tested, the relief valve is seated and sealed to a minimum of 30 psi with full pop off at 55-60 psi
  • Increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system function
  • Fueling® oil pump and camplate combination eliminate common pressure and scavenge issues associated with the factory oiling systems
  • Quieter and smoother engine operation
  • Increase oil pressure, scavenge volume and engine oil flow
  • 42% more scavenge volume with port sizing, matched passages and holes to the engine case
  • 68% more oil volume to the crankshaft and connecting rod bearing
  • 15-25 degree cooler engine temperatures
  • 15-30 degree cooler oil temperatures
  • 10-30 more PSI of oil pressure
  • M-Eight Twin-Cooled™​ motor oil pump specs: 30% more pressure gear volume over stock and 53% more scavenge gear volume over stock
  • M-Eight Oil-Cooled motor pump specs: 27% more pressure and scavenge gear volume over stock
  • Reduces wet sumping, blow by and oily air cleaners
  • Test results show 2 HP gain and 2 ft/lbs of torque gain to the rear wheel on M-Eight
  • Includes billet 6061 aluminum high volume oil pump, High Flow camplate, HP+® Hydraulic roller lifters, cam installation kit, cam bearing, cam/crank bolts and washers, engine and fastener assembly lube
  • Made in the U.S.A.

NOTE: Feuling test results show as much as 50% reduction of engine sump oil level.

NOTE: Block-off plate required when using gear drive cams.

NOTE: M-Eight engines must check clearance on front exhaust lifter to camshaft flange fit.

Fits:

2018 Harley-Davidson Breakout – FXBR
2018 Harley-Davidson Breakout 114 – FXBRS
2018 – 2019 Harley-Davidson CVO Road Glide Custom FLTRXSE
2017 – 2019 Harley-Davidson CVO Street Glide FLHXSE
2018 Harley-Davidson Deluxe – FLDE
2017 – 2019 Harley-Davidson Electra Glide Police FLHTPI
2019 Harley-Davidson Electra Glide Standard EFI FLHTI
2017 – 2019 Harley-Davidson Electra Glide Ultra Classic EFI FLHTCUI
2017 – 2018 Harley-Davidson Electra Glide Ultra Limited FLHTK
2017 – 2018 Harley-Davidson Electra Glide Ultra Limited Low FLHTKL
2018 Harley-Davidson Fat Bob – FXFB
2018 Harley-Davidson Fat Bob 114 – FXFBS
2018 Harley-Davidson Fat Boy – FLFB
2018 Harley-Davidson Fat Boy 114 – FLFBS
2017 – 2018 Harley-Davidson Freewheeler FLRT
2019 Harley-Davidson FXDR 114
2018 Harley-Davidson Heritage Classic – FLHC
2018 Harley-Davidson Heritage Classic 114 – FLHCS
2018 Harley-Davidson Low Rider – FXLR
2017 – 2019 Harley-Davidson Road Glide Custom FLTRX
2017 – 2019 Harley-Davidson Road Glide Special FLTRXS
2017 – 2018 Harley-Davidson Road Glide Ultra FLTRU
2017 – 2019 Harley-Davidson Road King EFI FLHR
2017 – 2019 Harley-Davidson Road King Special FLHRXS
2018 – 2019 Harley-Davidson Softail Breakout 114 FXBRS
2018 – 2019 Harley-Davidson Softail Breakout FXBR
2018 – 2019 Harley-Davidson Softail Deluxe FLDE
2018 – 2019 Harley-Davidson Softail Fat Bob 114 FXFBS
2018 – 2019 Harley-Davidson Softail Fat Bob FXFB
2018 – 2019 Harley-Davidson Softail Fat Boy 114 FLFBS
2018 – 2019 Harley-Davidson Softail Fat Boy FLFB
2018 – 2019 Harley-Davidson Softail Heritage Classic 114 FLHCS
2018 – 2019 Harley-Davidson Softail Heritage Classic FLHC
2018 – 2019 Harley-Davidson Softail Low Rider FXLR
2018 Harley-Davidson Softail Slim – FLSL
2018 – 2019 Harley-Davidson Softail Slim FLSL
2018 – 2019 Harley-Davidson Softail Sport Glide FLSB
2018 – 2019 Harley-Davidson Softail Street Bob FXBB
2018 Harley-Davidson Sport Glide – FLSB
2018 Harley-Davidson Street Bob – FXBB
2017 – 2019 Harley-Davidson Street Glide EFI FLHX
2017 – 2019 Harley-Davidson Street Glide Special FLHXS

Additional information

Weight 8 lbs
Dimensions 18 × 10 × 4 in
Application

Oil-Cooled motor, Twin-Cooled motor

Block Off Plate Needed?

No, Yes

Reviews

There are no reviews yet.

Be the first to review “Feuling HP+ Oil System Pack for M8”

Your email address will not be published. Required fields are marked *